HP eld Page 192 Manual Download

Page: 192 / 283

Output Listings and Error Handling

eld Manual—527255-009

6-82

Error Messages

Recovery.

Remove the offending option.

Cause.

You specified the

-alf

option, telling the name of the program or DLL that

you want to update. Various other options are allowed with the

-alf

option, and

some of these other options also have filenames as parameters. But, in addition to all

these filenames, you also had two other filenames on the command line by

themselves, not as parameters of options. It is possible to have one such filename, to

tell the name of the zimpimp file that represents the DLLs that constitute system library.

However, it is never legal to have more than one such filename.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

Perhaps you need to review the section of the manual that describes the

alf

option. The only filenames that should be on the command line are as described

above.

Cause.

You used the -no_preset or -must_preset option, which affect the

eld

program’s behavior when it is creating a program or DLL, and you also used the

-r

option, to tell

eld

to build another object file that could be used as

eld

input, rather

than a program or DLL. That’s inconsistent.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

If your intention is to create a program or DLL, don’t use the

-r

option. If

your intention is to create another object file that can be used as

eld

input, rather than

a program or DLL, then don’t use the -no_preset or -must_present option.

Cause.

The -no_preset option tells

eld

not to mark the file “preset”, because you

know that you don’t have the right linker inputs to fix up references correctly. The -

must_preset option tells

eld

that you believe you do have the right linker inputs to fix

up references correctly, and it should be an error if

eld

can not do that. These are

contradictory.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

Based on what these two options do, decide which one you want to give, or

neither.

1524 You can put one filename on the command line with the
-alf option, to be the zimpimp file, but more than one
filename is an error.

1526 Can't specify the -no_preset or -must_preset option with
the -r option.

1527 Can't specify the -must_preset option with the -
no_preset option.

Summary of Contents for eld




























































































































































































































































































Search results

Summary of Contents for eld

Reviews:

Related manuals for eld

Brands by name

Popular brands

HP eld, Manual

Search results

Summary of Contents for eld

Reviews:

Related manuals for eld

Brands by name

Popular brands