HP eld Manual Download Page 190

Page: 190 / 283

Output Listings and Error Handling

eld Manual—527255-009

6-80

Error Messages

Cause.

You wrote a callable procedure, and the object file produced by the compiler is

supposed to tell how many parameters it has, which should be a number between 0

and 32. However, the object file said something else.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

If you wrote a callable procedure with more than 32 parameters, you need

to write it a different way, because a callable procedure cannot have more than 32

parameters. The exact definition of what constitutes “one parameter” may depend on

the language and is beyond the scope of this manual. In any case, the fact that the

compiler created such a bad file is also a bug that should be reported to HP.

Cause.

You used the

<option name>

option, to provide instructions to

eld

about

how to create the DLL or program that you are building, and you also used the

-r

option, to specify

eld

to build another object file that can be used as a linker input,

rather than a program or a DLL.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

If your intention is to create a program or a DLL, do not specify the

-r

option. If your intention is to combine several existing object files into a new object file

that can be processed again by

eld

then do not specify the

<option name>

option.

Cause.

The procedure named in the message has the CALLABLE (or

KERNEL_CALLABLE) attribute. And, you have specified that this procedure be the

main procedure where execution begins for the program that you are building, either by

using the -e option or by the fact that the procedure is marked with the MAIN attribute

in its object file. However, that combination is not allowed.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

If your intention is that this procedure be the place where execution begins

for your program, then it cannot be marked CALLABLE or KERNEL_CALLABLE. If

you want your program to begin execution in privileged mode, you can accomplish that

purpose by instead giving the procedure the PRIV attribute. If you specified that this

procedure be the main entry point by giving the -e option, are you sure you wanted to

do that? In pTAL, you could do that if you forgot to put the MAIN attribute on the main

procedure, but it would probably be better for you to change the source that way, at the

same time that you change it to saying PRIV rather than CALLABLE. It is usually a

mistake to give the -e option when building a program in any other language. For

example, in C, the procedure that you call “main” is not really where execution begins,

so you should not say “-e main”. Since it isn’t where execution really begins, it is okay

1519 The <option name> option is not allowed with the -r
option.

1520 A main entry point (<symbol name>) is not allowed to be
callable.

Summary of Contents for eld




























































































































































































































































































Search results

Summary of Contents for eld

Reviews:

HP eld, Manual, Page: 190 / 283

Search results

Summary of Contents for eld

Reviews: