manualshive.com logo in svg

HP eld, Manual

Introducing the HP eld manual, a comprehensive guide that provides step-by-step instructions and valuable insights to enhance your HP eld experience. As a free download available exclusively on our website, easily access this essential manual at manualshive.com to unlock the full potential of your HP eld device.

Share
Download
background image

Output Listings and Error Handling

eld Manual—527255-009

6-9

Error Messages

that need to be initialized with the addresses of procedures, in the file you are building 

or some other DLL, whose addresses can’t be represented in 32 bits.

Effect.

 Error (The linker cannot do what was requested of it and will eventually stop, 

but may continue for the purpose of detecting additional errors before stopping).

Recovery.

Did you need to use the

 -t

 and 

-d

 options?  There usually is no reason to 

use these options when building a program, and there usually is no reason to use the 

-

d

 option at all.  But, if you want to assign addresses to this program or DLL that don’t fit 

into 32 bits, or make references to some other DLL that has a range of addresses that 

doesn’t fit into 32 bits, then change your source code so that it doesn’t try to use 32-bit 

procedure pointers in those cases.

Cause.

You are building a program or DLL that has the HIGHPIN attribute set ON, 

which is the default, but during the link one or more of the DLLs that 

eld

 looked at had 

the HIGHPIN attribute set OFF.  

Effect.

Warning  (

eld

 produces an output file, but it might not be what you intended). 

Recovery.

This is only considered a warning by 

eld

 because what matters is which 

DLLs you will be using at runtime.  Determine which of your programs and DLLs 

should have HIGHPIN ON, and which should have it OFF.  The rule is that a program 

or DLL with HIGHPIN ON cannot be a client of a DLL with HIGHPIN OFF.  Your 

program must satisfy this rule or NSK will not allow it to run.  If you also satisfy this rule 

at link time, your link won’t produce this warning message.

Cause.

eld

 prints out informational messages about some of the files that it used and 

what types of files they were.  In this case, it is telling you about a complete import 

library.

Effect.

Information (This is not indicative of a problem).

Recovery.

No action required.

Cause.

eld

 prints out informational messages about some of the files that it used and 

what types of files they were.  In this case, it is telling you about an incomplete import 

library.

Effect.

 Information (This is not indicative of a problem).

Recovery.

No action required.

1014 The output program or DLL has highpin on, although DLL 
<filename> has highpin off.

1017 Using complete import library <filename>.

1018 Using incomplete import library <filename>.

Summary of Contents for eld




























































































































































































































































































Reviews:

No comments

Related manuals for eld

ICP ICP Controller Using Manual preview
ICP Controller
Brand: ICP Pages: 16
Red Hat NETWORK BASIC - USER REFERENCE GUIDE 3.2 User Reference Manual preview
NETWORK BASIC - USER REFERENCE GUIDE 3.2
Brand: Red Hat Pages: 76
Red Hat ENTERPRISE 5.4 RELEASE NOTES Manual preview
ENTERPRISE 5.4 RELEASE NOTES
Brand: Red Hat Pages: 466
AVG ANTI-VIRUS 2011 - REV 2011.11 User Manual preview
ANTI-VIRUS 2011 - REV 2011.11
Brand: AVG Pages: 209
Draytek Smart Monitor User Manual preview
Smart Monitor
Brand: Draytek Pages: 73
Symantec pcAnywhere Administrator'S Manual preview
pcAnywhere
Brand: Symantec Pages: 105
Symantec Norton Personal Firewall 2003 User Manual preview
Norton Personal Firewall 2003
Brand: Symantec Pages: 151
Symantec SERVICEDESK 7.0 MR2 Implementation Manual preview
SERVICEDESK 7.0 MR2
Brand: Symantec Pages: 188
Intel Solid-State Drive Toolbox User Manual preview
Solid-State Drive Toolbox
Brand: Intel Pages: 32
Elecard AVC HD Player 5.7 User Manual preview
AVC HD Player 5.7
Brand: Elecard Pages: 39
Focusrite Liquid 4PRE User Manual preview
Liquid 4PRE
Brand: Focusrite Pages: 35
Autodesk ARCHITECTURE 2010 Brochure preview
ARCHITECTURE 2010
Brand: Autodesk Pages: 4
Icom RS-RP2C Setup Instructions preview
RS-RP2C
Brand: Icom Pages: 16
FARONICS ANTI-VIRUS Getting Started Manual preview
ANTI-VIRUS
Brand: FARONICS Pages: 4
Lexicon PCM NATIVE DUAL DELAY Owner'S Manual preview
PCM NATIVE DUAL DELAY
Brand: Lexicon Pages: 36
Lexicon PCM NATIVE CHORUS Owner'S Manual preview
PCM NATIVE CHORUS
Brand: Lexicon Pages: 36
FARONICS DEEP FREEZER PROFESSIONAL 5 Manual preview
DEEP FREEZER PROFESSIONAL 5
Brand: FARONICS Pages: 31
Paradyne 8995 Installation And User Manual preview
8995
Brand: Paradyne Pages: 24

Brands by name

Popular brands

Load more brands