HP E3800 Series, Access Security Manual

Page: 72 / 732

2-22
Configuring Username and Password Security
Saving Security Credentials in a Config File
the username and password used as 802.1X authentication credentials for
access to the switch. You can store the
password port-access
values in the
running configuration file by using the
include-credentials
command.
Note that the
password port-access
values are configured separately from
local operator username and passwords configured with the
password
operator
command and used for management access to the switch. For
more information about how to use the
password port-access
command
to configure operator passwords and usernames for 802.1X authentica-
tion, see “Do These Steps Before You Configure 802.1X Operation” on page
13-13 in this guide.