HP E3800 Series Access Security Manual Download Page 514

Page: 514 / 732

11-4

Configuring Advanced Threat Protection

DHCP Snooping

Enabling DHCP Snooping

DHCP snooping is enabled globally by entering this command:

HP Switch(config)# dhcp-snooping

Use the

form of the command to disable DHCP snooping.

To display the DHCP snooping configuration, enter this command:

HP Switch(config)# show dhcp-snooping

An example of the output is shown below.

Syntax:

authorized server:

Enter the IP address of a trusted DHCP

server. If no authorized servers are configured, all DHCP
server addresses are considered valid.
Maximum: 20 authorized servers

database:

To configure a location for the lease database,

enter a URL in the format

tftp://ip-addr/ascii-string

. The

maximum number of characters for the URL is 63.

option

Add relay information option (Option 82) to DHCP

client packets that are being forwarded out trusted ports.
The default is

yes

add relay information.

trust

Configure trusted ports. Only server packets received

on trusted ports are forwarded. Default:

untrusted

verify

Enables DHCP packet validation. The DHCP client

hardware address field and the source MAC address must
be the same for packets received on untrusted ports or the
packet is dropped. Default:

Yes

vlan

Enable DHCP snooping on a vlan. DHCP snooping

must be enabled already. Default:

Summary of Contents for E3800 Series





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E3800 Series

Reviews:

Related manuals for E3800 Series

Brands by name

Popular brands

HP E3800 Series, Access Security Manual

Search results

Summary of Contents for E3800 Series

Reviews:

Related manuals for E3800 Series

Brands by name

Popular brands