HP E3800 Series, Access Security Manual

Page: 538 / 732

11-28
Configuring Advanced Threat Protection
Dynamic IP Lockdown
Adding a Static Binding
To add the static configuration of an IP-to-MAC binding for a port to the lease
database, enter the
ip source-binding
command at the global configuration
level. Use the
no
form of the command to remove the IP-to-MAC binding from
the database.
N o t e
Note that the
ip source-binding
command is the same command used by the
Dynamic ARP Protection feature to configure static bindings. The Dynamic
ARP Protection and Dynamic IP Lockdown features share a common list of
source IP-to-MAC address bindings.
Verifying the Dynamic IP Lockdown Configuration
To display the ports on which dynamic IP lockdown is configured, enter the
show ip source-lockdown status command at the global configuration level.
Syntax: [no] ip source-binding < vlan-id > < ip-address > < mac-address > < port-
number >
vlan-id
Specifies a valid VLAN ID number to bind with
the specified MAC and IP addresses on the port
in the DHCP binding database.
ip-address
Specifies a valid client IP address to bind with a
VLAN and MAC address on the port in the DHCP
binding database.
mac-address
Specifies a valid client MAC address to bind with
a VLAN and IP address on the port in the DHCP
binding database.
port-number
Specifies the port number on which the IP-to-
MAC address and VLAN binding is configured in
the DHCP binding database.
Syntax: show ip source-lockdown status