HP E3800 Series, Access Security Manual

Page: 139 / 732

4-25
Web and MAC Authentication
Configuring Web Authentication
Syntax: aaa port-access web-based < port-list > [reauth-period <0 - 9999999>]
Specifies the time period, in seconds, the switch
enforces on a client to re-authenticate. When set to
0
,
reauthentication is disabled. (Default: 300 seconds)
Syntax: aaa port-access web-based < port-list > [reauthenticate]
Forces a reauthentication of all attached clients on the
port.
Syntax: aaa port-access web-based < port-list > [redirect-url < url >]
no aaa port-access web-based < port-list > [redirect-url]
Specifies the URL that a user is redirected to after a
successful login. Any valid, fully-formed URL may be
used, for example, http://welcome-server/welcome.htm
or http://192.22.17.5. HP recommends that you provide
a redirect URL when using Web Authentication.
Note: The
redirect-url
command accepts only the first
103 characters of the allowed 127 characters.
Use the
no
form of the command to remove a specified
redirect URL.
(Default: There is no default URL. Browser behavior
for authenticated clients may not be acceptable.)
Syntax: aaa port-access web-based [e] < port-list > [server-timeout <1 - 300>]
Specifies the period, in seconds, the switch waits for a
server response to an authentication request. Depend-
ing on the current
max-requests value, the switch sends
a new attempt or ends the authentication session.
(Default: 30 seconds)