HP E3800 Series, Access Security Manual

Page: 372 / 732

9-8
Configuring Secure Socket Layer (SSL)
Configuring the Switch for SSL Operation
CLI commands used to generate a Server Host Certificate.
To generate a host certificate from the CLI:
i. Generate a certificate key pair. This is done with the crypto key
generate cert command. The default key size is 512.
N o t e
If a certificate key pair is already present in the switch, it is not necessary to
generate a new key pair when generating a new certificate. The existing key
pair may be re-used and the crypto key generate cert command does not have
to be executed
ii. Generate a new self-signed host certificate. This is done with the
crypto host-cert generate self-signed [ Arg-List]
command.
N o t e
When generating a self-signed host certificate on the CLI if there is not
certificate key generated this command will fail.
Comments on Certificate Fields.
There are a number arguments used in the generation of a server certificate.
table 9-1, “Certificate Field Descriptions” describes these arguments.
Syntax: crypto key generate cert rsa bits < 512 | 768 |1024 >
Generates a key pair for use in the certificate.
crypto key zeroize cert
Erases the switch’s certificate key and disables SSL opera-
tion.
crypto host-cert generate self-signed [arg-list]
Generates a self signed host certificate for the switch. If a
switch certificate already exists, replaces it with a new
certificate. (See the Note, above.)
crypto host-cert zeroize
Erases the switch’s host certificate and disables SSL opera-
tion.