HP E3800 Series Access Security Manual Download Page 638

Page: 638 / 732

13-66

Configuring Port-Based and User-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

Table 13-2. Output for Determining Open VLAN Mode Status (Figure 13-18, Lower)

Status Indicator

Meaning

Status Closed:

Either no client is connected or the connected client has not received authorization through

802.1X authentication.

Open:

An authorized 802.1X supplicant is connected to the port.

Current VLAN ID

< vlan-id >:

Lists the VID of the static, untagged VLAN to which the port currently belongs.

No PVID:

The port is not an untagged member of any VLAN.

Current Port CoS

Refer to the section describing RADIUS support for Identity-Driven
Management—IDM—in chapter 6, “RADIUS Authentication, Authorization,
and Accounting” in this guide.

% Curr. Rate Limit
Inbound

Syntax:

show vlan <

vlan-id

Displays the port status for the selected VLAN, including an
indication of which port memberships have been temporarily
overridden by Open VLAN mode.

Summary of Contents for E3800 Series





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for E3800 Series

Reviews:

Related manuals for E3800 Series

Brands by name

Popular brands

HP E3800 Series, Access Security Manual

Search results

Summary of Contents for E3800 Series

Reviews:

Related manuals for E3800 Series

Brands by name

Popular brands