Removal and replacement procedures 37
o
Full-height blades: bays 1-5 ("
Half-height or full-height blade
" on page
34
)
o
Device bay blanks: bays 9-13 ("
Device bay blank
" on page
31
)
o
Power supplies or blanks: bays 1-4 ("
HP BladeSystem c7000 power supply or power supply blank
"
on page
30
)
3.
Remove the three T-15 Torx screws that secure the Insight Display cable center cover, and then remove
the cover.
4.
Disconnect the Insight Display cable.
5.
Remove the two T-10 Torx screws that secure the Insight Display.
6.
Remove the upper brace.
7.
Tilt the Insight Display forward and remove it from the enclosure.
