![background image](http://html.mh-extra.com/html/hp/bladesystem-c7000/bladesystem-c7000_maintenance-and-service-manual_156957036.webp)
Removal and replacement procedures 36
o
Half-height blade
o
Full-height blade
CAUTION:
For best cooling practices, do not operate the enclosure for extended periods with
more than one component or blank removed. When removing an active component, replace it
with a blank.
To replace the component, reverse the removal procedure.
HP BladeSystem Insight Display
To remove the component:
1.
Power down the enclosure (on page
29
).
2.
Remove the following components:
o
Half-height blades: bays 9-13 ("
Half-height or full-height blade
" on page
34
)