![background image](http://html.mh-extra.com/html/hp/bladesystem-c7000/bladesystem-c7000_maintenance-and-service-manual_156957043.webp)
Removal and replacement procedures 43
Onboard Administrator
To remove the component:
1.
Disconnect all cables from the component.
2.
Press the release tab and open the handle.
3.
Remove the Onboard Administrator module.
CAUTION:
For best cooling practices, do not operate the enclosure for extended periods with
more than one component or blank removed. When removing an active component, replace it
with a blank.
To replace the component, reverse the removal procedure.
Onboard Administrator tray
To remove the component:
1.
Remove the Onboard Administrator modules ("
Onboard Administrator
" on page
43
).
2.
Remove the Onboard Administrator blanks ("
Onboard Administrator blank
" on page
42
).
3.
Press the release tab and open the handle.