![background image](http://html.mh-extra.com/html/hp/bladesystem-c7000/bladesystem-c7000_maintenance-and-service-manual_156957055.webp)
Removal and replacement procedures 55
11.
Remove the eight slotted T-15 Torx screws that secure the midplane assembly, and then remove the
midplane assembly from the rear cage.
To replace the midplane assembly, reverse the removal procedure.
CAUTION:
The LCD cable must be correctly routed for proper operation.
To route the LCD cable:
1.
When installing the midplane assembly onto the rear cage assembly, ensure the LCD cable is routed
behind the interconnect module rubber boot and through the sheet-metal gaps. Route the cable as
shown in the following figure.