Removal and replacement procedures 44
4.
Remove the Onboard Administrator tray.
CAUTION:
For best cooling practices, do not operate the enclosure for extended periods with
more than one component or blank removed. When removing an active component, replace it
with a blank.
To replace the component, reverse the removal procedure.
AC input module
To remove the component:
1.
Power down the server blades ("
Power down the server blades or workstation blades
" on page
28
).
2.
Power down the enclosure (on page
29
).
3.
Loosen the two slotted T-15 Torx screws that secure the AC input module.
4.
Remove the AC input module.
