![background image](http://html.mh-extra.com/html/hp/bladesystem-c7000/bladesystem-c7000_maintenance-and-service-manual_156957050.webp)
Removal and replacement procedures 50
4.
Disengage and extend the following components approximately 8 cm (3 in):
o
Half-height and full-height blades ("
Half-height or full-height blade
" on page
34
)
o
Power supplies ("
HP BladeSystem c7000 power supply or power supply blank
" on page
30
)
5.
Remove the fans ("
Active Cool 200 fan
" on page
39
).
6.
Remove the interconnect switches and Pass-Thru modules ("
Interconnect switch or Pass-Thru module
" on
page
40
).
7.
Remove the Onboard Administrator modules ("
Onboard Administrator
" on page
43
).
Remove the Onboard Administrator tray ("
Onboard Administrator tray
" on page
43
).
8.
Remove the rear cage ("
Rear cage
" on page
45
).
WARNING:
To reduce the risk of personal injury or equipment damage, at least two people are
needed to safely move the rear cage.
9.
Remove the two T-15 Torx screws that secure the pass-thru board.