Configuring SNMP Support
NOTE:
Only enclosure administrators may execute these tasks.
Entering a Community String
To enter a read community or write community string using the Web-based user interface:
1.
Click the
Enclosure
tab.
2.
Click
SNMP Configuration
in the left panel.
3.
Click the
Read Community
or
Write Community
field.
4.
Type the string.
NOTE:
Entering a blank string into the Read Community field sets the Read Community to
“public.” Entering a blank string into the Write Community field disables the SNMP set commands.
5.
5. Click
Apply
.
To enter a read community or write community string using the CLI, type:
SET SNMP COMMUNITY [READ | WRITE] <community name>
The write <community name> must be 1-20 characters long and the read <community name> must be
1-20 characters long. Both community names support all alphanumeric characters, the underscore, and
the dash characters.
ENWW
Configuring SNMP Support
85