●
YY: year
●
TZ: time zone (case-sensitive)
If the time zone is left blank, the current time is left in effect.
●
hh is an integer from
0-23
●
mm is an integer from
0-59
For a list of time zones, see
Time Zone Settings
on page 130
. NTP must be
disabled before manually
setting the date and time.
SET ENCLOSURE ASSET
{TAG}
<asset tag>
Changes the enclosure asset tag
Only enclosure administrators
may execute this command.
The <asset tag> must be 1-31
characters long and can
include alphanumeric, dash,
and underscore characters.
The default enclosure asset
tag is blank. To set a blank
asset tag, specify the blank
value using the quotes.
SET ENCLOSURE NAME
<enclosure name>
Changes the enclosure name
Only enclosure administrators
may execute this command.
The <enclosure name> must
be 1-32 characters long and
can include alphanumeric,
dash, and underscore
characters. <
The default enclosure name is
IA-MAC, where MAC is
replaced with the actual MAC
address.
SET ENCLOSURE UID [ON |
OFF]
Turns the enclosure Unit Identification LED on or off
Only enclosure administrators
may execute this command.
SET RACK NAME
<rack name>
Sets the name for the rack where that enclosure resides
Only enclosure administrators
may execute this command.
The <rack name> must be
1-32 characters long and can
include alphanumeric, dash,
and underscore characters.
The default rack name is
UnnamedRack
.
SHOW CONFIG
Displays the script required to recreate the settings of the
enclosure
Passwords are not included for any user.
Only the enclosure
administrators may execute
this command.
SHOW DATE
Displays the current date, time, and time zone of the internal
clock of the enclosure.
None
SHOW DISPLAY
Displays whether event notification is on or off.
None
SHOW ENCLOSURE FAN
[fan number> | ALL]<
Displays the status, redundancy, and partner, speed, part
number for the requested fan.
If
ALL
is entered, this information is shown for all fans.
None
(continued)
58
Chapter 5 Command Line Interface
ENWW
