AlphaServer ES47/ES80/GS1280 Server Management CLI Reference
3.43 set escape
Changes the server management CLI escape sequence.
This command enables the user to change the escape sequence used for invoking the server
management CLI. The escape sequence can be any character string, not to exceed 15
characters, and it is case insensitive. A typical sequence consists of two or more control
characters. It is recommended that control characters be used in preference to ASCII characters.
The escape sequence is stored in the MBM's or PBM’s EEPROM. The default escape sequence
is ^[^[SPMU. The escape key on a PC keyboard is equivalent to ^[ (control left-bracket). Either
<esc> or ^[ is acceptable.
Use the
show modem
command to confirm the escape sequence before exiting the server
management CLI.
Syntax
set escape
[<esc_sequence>]
Argument
esc_sequence
The escape sequence for entering the server management CLI. The
default escape sequence is restored if no argument is provided.
Options
None
Example
The following example consists of two instances of the Esc key and the letters
FUN
. The
F
is
not displayed when you set the escape sequence because it is preceded by the escape
character.
MBM> set escape un
MBM>
See Also
show modem
3-68
Summary of Contents for AlphaServer ES47
Page 4: ......
Page 14: ......
Page 51: ...Commands See Also show partition save partition create partition modify partition 3 27 ...
