manualshive.com logo in svg

HP AlphaServer ES47, Cli Reference Manual, Page: 99 / 152

Share
Download
HP AlphaServer ES47 Cli Reference Manual Download Page 99

Commands 

3.49   set time 

Sets the common base time. By default, this command sends the current base time to the primary 
CPU’s MBM, which then sends out a time synchronizer message to all MBMs and PBMs to get 
this new base time. This command enables the user to set up both date and time or just one of 
them. 

You can use 

show time 

to confirm your changes. 

Warning:

  Changing the base time will affect the time on all existing partitions. 

Syntax 

set time 

<date> | <time> 

Arguments 

date 

The format is yyyy/mm/dd. 

time 

The format is hh:mm:ss. 

Options 

None 

Examples 

1.  Change the date and time. 

MBM> set time 2002/04/16 17:20:30 
MBM> show time 
Common base time: 2002/04/16 17:20:34 
 
HP Name              SP Name              Delta Time (Days hh:mm:ss) 
hp0                  Default_SP               +00 +00:+00:+00 
hp1                  Default_SP               -01 -01:-01:-01 
MBM> 

2.  Change the time only. 

MBM> set time 14:45:00 
MBM> 

3.  Change the date only. 

MBM> set time 2003/08/16 
MBM> 

See Also 

show time

 

3-75

Summary of Contents for AlphaServer ES47

























































































































































Reviews:

No comments