manualshive.com logo in svg

HP AlphaServer ES47, Cli Reference Manual, Page: 73 / 152

Share
Download
HP AlphaServer ES47 Cli Reference Manual Download Page 73

Commands 

3.33   mbmboot or @ 

NOTE:

  This command works only from within the MBM Failsafe Loader.   

This command boots the main MBM/PBM image from flash or from the network. 

Syntax 

mbmboot 

 
or

 

 
@ 

 

Arguments 

None 

Options 

None 

Example 

Boot the main MBM image 
  

FSL> mbmboot 
boot device          : flash 
unit number          : 0 
processor number     : 0 
host name            : host 
file name            : vxWorks 
inet on ethernet (e) : 10.250.250.250 
host inet (h)        : 10.253.0.254 
user (u)             : target 
flags (f)            : 0xa0 
other (o)            : fei 
 
06 07 08 09 Attaching interface lo0...done 
 
Adding 5254 symbols for standalone. 
 
               VxWorks 
 
Copyright 1984-1998  Wind River Systems, Inc. 
 
          CPU: AMD SC520 CDP 
      VxWorks: 5.4.2 
  BSP version: 1.2/0 
Creation date: Apr 16 2002 
          WDB: Ready. 

 

3-49

Summary of Contents for AlphaServer ES47

























































































































































Reviews:

No comments