manualshive.com logo in svg

HP AlphaServer ES47, Cli Reference Manual, Page: 104 / 152

Share
Download
HP AlphaServer ES47 Cli Reference Manual Download Page 104

AlphaServer ES47/ES80/GS1280 Server Management CLI Reference 

3.53   show duo 

Shows the configuration and state of dual processor modules. 

When calculating the total CPU memory, the RAID RIMMs are excluded.  RIMM4 is redundant if 
RIMMs 0 - 4 are fully populated.  RIMM9 is also redundant if RIMMs 5-9 are fully populated. 

Syntax 

show duo 

[-cabinet <cabinet> -drawer <drawer> [duo<n>]] 

Argument 

duo<n> 

The dual processor module by cabinet and drawer number. The optional 

n

 is 

the dual processor module within the 8P drawer, a value from 0 to 3. 

Options 

-cabinet<cabinet> 

Cabinet number in hex. If this qualifier is not used, all cabinets are 
shown. 

-drawer<drawer> 

Drawer number in hex. If this qualifier is not used, all drawers are 
shown. 

Example 

1.  Show all dual CPU modules in the system. 

MBM> sh duo 
DUO0 is in Cabinet 0, Drawer 0, Slot 0 
 CMM Status: OK 
 CMM Power state: ON 
                            CPU0                       CPU1 
                  -------------------------  ------------------------ 
 CPU State:           SRM                        XSROM 
 CPU Diag status:     TBD                        TBD 
 CPU Memory:        1024MB (exclude RAID)      1024MB (exclude RAID) 
         RIMM0:      128MB                      128MB 
         RIMM1:      128MB                      128MB 
         RIMM2:      128MB                      128MB 
         RIMM3:      128MB                      128MB 
         RIMM4:        0MB (Non-existent)         0MB (Non-existent) 
         RIMM5:      128MB                      128MB 
         RIMM6:      128MB                      128MB 
         RIMM7:      128MB                      128MB 
         RIMM8:      128MB                      128MB 
         RIMM9:        0MB (Non-existent)         0MB (Non-existent) 
 CPU Revision:        EV7 2.1                   EV7 2.1 
 CPU Cache:             1.5 MB                    1.5 MB 
 CPU Speed:          1000 MHz                  1000 MHz 
 
DUO1 is in Cabinet 0, Drawer 0, Slot 1 
 CMM Status: OK 
 CMM Power state: ON 
                            CPU2                       CPU3 
                  -------------------------  ------------------------ 
 CPU State:           XSROM                      XSROM 
 CPU Diag status:     TBD                        TBD 
 CPU Memory:        1024MB (exclude RAID)      1024MB (exclude RAID) 

 

3-80

Summary of Contents for AlphaServer ES47

























































































































































Reviews:

No comments