HP AlphaServer ES47 Cli Reference Manual Download Page 75

Page: 75 / 152

Commands

3.34 modify partition

Modify existing hard partition attributes. This command will change the hard partition attributes,
including maximum CPUs and memory striping.

Syntax

modify partition

-hp <hard_partition> {CPU <max_CPUs | stripe {on, off}}

Arguments

-hp <hard_partition>

Hard partition name

-CPU <max_CPUs>

The maximum number of CPUs that can ever be
placed in the hard partition. This value is used to
determine the proper routing and memory
algorithm.

-stripe {on, off}

Turn on or turn off memory striping

Options

None

Example

1. Modify hard partition of account_dept by allowing more CPUs.

MBM> modify partition -hp account_dept -cpu 64
MBM>

See Also

show partition, create partition

3-51

Summary of Contents for AlphaServer ES47

























































































































































Search results

Summary of Contents for AlphaServer ES47

Reviews:

Related manuals for AlphaServer ES47

Brands by name

Popular brands

HP AlphaServer ES47, Cli Reference Manual

Search results

Summary of Contents for AlphaServer ES47

Reviews:

Related manuals for AlphaServer ES47

Brands by name

Popular brands