HP 8/20q Cli Manual Download Page 140

Page: 140 / 332

140 Command reference

The following is an example of the

capture remove

command:

8/20q FC Switch #> admin start

8/20q FC Switch (admin) #> callhome edit

8/20q FC Switch (admin-callhome) #> capture remove

Capture Entries for Profile: Tech_Support_Center

Index TimeOfDay DayOfWeek Interval

----- --------- --------- --------

1 02:00 Sat 1 (weeks)

Please select a capture entry from the list above ('q' to quit): 1

The selected capture entry has been removed from profile
Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

Summary of Contents for 8/20q













































































































































































































































































































































Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands

HP 8/20q, Cli Manual

Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands