HP 8/20q Cli Manual Download Page 161

Page: 161 / 332

8/20q Fibre Channel Switch command line interface guide 161

help

Description

Displays a brief description of the specified command, its operands, and usage.

Authority

None

Syntax

help

[command] [operand]

Operands

[command]

Displays a summary of the command given by [command] and its operands. If you omit

[command], the system displays all available commands.

[operand]

Displays a summary of the operand given by [operand] belonging to the command given by

[command]. If you omit [operand], the system displays the available operands for the specified

command.

all

Displays a list of all available commands (including command variations).

Examples

The following is an example of the

help config

command:

8/20q FC Switch #> help config

config CONFIG_OPTIONS

The config command operates on configurations.

Usage: config { activate | backup | cancel | copy | delete |

edit | list | restore | save }

The following is an example of the

help config edit

command:

8/20q FC Switch #> help config edit

config edit [CONFIG_NAME]

This command initiates a configuration session and places the current session

into config edit mode.

If CONFIG_NAME is given and it exists, it gets edited; otherwise, it gets

created. If it is not given, the currently active configuration is edited.

Admin mode is required for this command.

Usage: config edit [CONFIG_NAME]

Summary of Contents for 8/20q













































































































































































































































































































































Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands

HP 8/20q, Cli Manual

Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands