HP 8/20q Cli Manual Download Page 157

Page: 157 / 332

8/20q Fibre Channel Switch command line interface guide 157

PrimarySecret

(ISL and Port Groups)

Hexadecimal string that is encrypted by the primary hash for

authentication with the member. The string has the following lengths

depending on the primary hash function:

•

MD5 hash: 16-byte

•

SHA-1 hash: 20-byte

SecondaryHash

(ISL and Port Groups)

Hash function to use to decipher the encrypted secondary secret sent

by the group member. Hash values are

MD5

SHA-1

. The

secondary hash is used when the primary hash is not available on

the group member. The primary hash and the secondary hash cannot

be the same.

SecondarySecret

(ISL and Port Groups)

Hex string that is encrypted by the secondary hash and sent for

authentication. The string has the following lengths, depending on the

secondary hash function:

•

MD5 hash: 16-byte

•

SHA-1 hash: 20-byte

Secret

(MS Groups)

Hexadecimal string that is encrypted by the hash function for

authentication with MS group members. The string has the following

lengths depending on the hash function:

•

MD5 hash: 16-byte

•

SHA-1 hash: 20-byte

Binding

(ISL Groups)

Domain ID of the switch to which to bind the ISL group member

worldwide name. This option is available only if

FabricBindingEnabled

is set to True using the

set config security

command. 0 (zero) specifies no binding.

Table 13

Group member attributes (continued)

Attribute

Description

Operands

list

Displays a list of all groups and the security sets of which they are members. This operand is

available without an Admin session.

members [group]

Displays all members of the group given by [group]. This operand is available without an Admin

session.

remove [group] [member_list]

Remove the port/device worldwide name given by [member] from the group given by [group].

Use a <space> to delimit multiple member names in

[member_list]

rename [group_old] [group_new]

Renames the group given by [group_old] to the group given by [group_new].

securitysets [group]

Displays the list of security sets of which the group given by [group] is a member. This operand is

available without an Admin session.

type [group]

Displays the group type for the group given by [group]. This operand is available without an

Admin session.

Notes

Primary and secondary secrets are not included in a switch configuration backup. Therefore, after

restoring a switch configuration, you must re-enter the primary and secondary secrets. Otherwise, the

switch will isolate because of an authentication failure.
For more information about managing groups in security sets, see the

securityset

command.

Summary of Contents for 8/20q













































































































































































































































































































































Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands

HP 8/20q, Cli Manual

Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands