HP 8/20q Cli Manual Download Page 135

Page: 135 / 332

8/20q Fibre Channel Switch command line interface guide 135

callhome

Description

Opens a Callhome Edit session in which to create and manage Call Home profiles.

NOTE:

The 8/20q Fibre Channel Switch Call Home service provides an e-mail notification

capability for the switch. This service has no relationship with the HP Call Home feature, which

notifies HP services.

Authority

Admin session, except for the

history

and

list

operands. The

clear

operand also requires an

Callhome Edit session.

Syntax

callhome

cancel

changeover

clear

edit

history

list

profile [profile]

queue

[option]

save

test profile [profile]

Operands

cancel

Closes the current Callhome Edit session. Any unsaved changes are lost.

changeover

Toggles activation between the primary SMTP server and the secondary SMTP server. Though the

active server status changes, the primary SMTP server remains the primary, and the secondary

SMTP server remains the secondary.

clear

Clears all Call Home profile information from the volatile edit copy of the Call Home database.

This operand requires a Callhome Edit session. This operand does not affect the non-volatile Call

Home database. However, if you enter the

callhome clear

command followed by the

callhome save

command, the non-volatile Call Home database will be cleared from the

switch.

NOTE:

The preferred method for clearing the Call Home database from the switch is the

reset callhome

command.

edit

Open a Callhome Edit session. Callhome Edit session commands include

callhome clear

and all

profile

commands.

history

Displays a history of Call Home modifications. This operand does not require an Admin session.

History information includes the following:
• Time of the most recent Call Home database modification and the user who performed it.
• Checksum for the Call Home database
• Profile processing information

list

profile [profile]

Lists the configuration for the profile given by [profile]. If you omit [profile], the command lists all

profiles and their configurations. If you omit the profile operand, the command lists the profile

names.

Summary of Contents for 8/20q













































































































































































































































































































































Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands

HP 8/20q, Cli Manual

Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands