HP 8/20q Cli Manual Download

Page: 181 / 332

8/20q Fibre Channel Switch command line interface guide 181

profile

Description

Creates and modifies profiles with which to customize Call Home e-mail notification. A profile

defines the event severity level at which to generate e-mails, e-mail subject and text, and e-mail

recipients.

NOTE:

The Call Home service provides an e-mail notification capability for the switch. This service

has no relationship with the HP Call Home feature, which notifies HP services.

Authority

Admin session and a Callhome Edit session. For information about starting a Callhome Edit session,

see the

callhome

command.

Syntax

profile

copy [profile_source] [profile_destination]

create [profile]

delete [profile]

edit [profile]

rename [profile_old] [profile_new]

Operands

copy [profile_source] [profile_destination]

Creates a new profile named [profile_destination] and copies the configuration into it from the

profile given by [profile_source]. You must enter the

callhome save

command to save your

changes. Neither [profile_source] nor [profile_destination] can be Tech_Support_Center.

create [profile]

Creates a profile with the name given by [profile]. A profile name must begin with a letter and be

no longer than 32 characters. Valid characters are alphanumeric, _, $, ^, and -. The

Tech_Support_Center profile name is reserved. The Call Home database supports a maximum of

25 profiles. You must enter the

callhome save

command to save your changes.

Table 16

describes the profile configuration parameters.

Table 16

Profile configuration parameters

Parameter

Description

Level

Event severity level at which to generate a Call Home e-mail message:

•

None

—Generates e-mail messages for all events.

•

Warn

—Generates e-mail messages for Warning, Critical, and Alarm

events.

•

Critical

—Generates e-mail messages for Critical and Alarm events.

•

Alarm

—Generates e-mail messages for Alarm events only.

Format

Level of detail to be included in the e-mail message:

•

ShortText

—Includes switch and event information.

•

FullText

—Includes switch information, event information, Call Home

contact information, and SNMP contact information.

•

Tsc1—Includes switch and event information in a format intended for

automated e-mail readers.

MaxSize

Maximum number of characters allowed in the e-mail message. Decreasing

this parameter makes it easier to read messages on small display devices

such as cell phones. The minimum is 650. The maximum and default is

2,000,000.

EmailSubject

Subject of the e-mail; up to 64 characters

Summary of Contents for 8/20q













































































































































































































































































































































Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands

HP 8/20q, Cli Manual

Search results

Summary of Contents for 8/20q

Reviews:

Related manuals for 8/20q

Brands by name

Popular brands