HP 645 G1 Maintenance And Service Manual Download

Page: 68 / 170

Slide the service cover toward the front of the computer (4) and lift (5) to remove the service cover.

Reverse this procedure to install the service cover.

Hard drive

NOTE:

The hard drive spare part kit does not include the hard drive bracket or screws. These components

are included in the Hard Drive Hardware Kit, spare part number 738395-001.

Description

Spare part number

For use in all computer models:

1-TB, 5400-rpm, 9.5-mm hard drive

778192-001

500-GB, 5400-rpm, 7.0-mm hard drive

778186-001

For use only on computer models equipped with an AMD processor:

750-GB, 7200-rpm, 9.5-mm hard drive

778191-001

750-GB, 7200-rpm, 9.5-mm hard drive for use only on computer models equipped with a 14.0-in.
display assembly

686850-001

500-GB, 7200-rpm, 9.5-mm hard drive for use only on computer models equipped with a 14.0-in.
display assembly

778189-001

500-GB, 7200-rpm, 7.0-mm, SED hard drive

703268-001

Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

Summary of Contents for 645 G1











































































































































































Search results

Summary of Contents for 645 G1

Reviews:

Related manuals for 645 G1

Brands by name

Popular brands

HP 645 G1, Maintenance And Service Manual

Search results

Summary of Contents for 645 G1

Reviews:

Related manuals for 645 G1

Brands by name

Popular brands