HP 645 G1 Maintenance And Service Manual Download

Page: 28 / 170

Front

Component

Description

(1)

Wireless light

●

White: An integrated wireless device, such as a
wireless local area network (WLAN) device and/or a
Bluetooth® device, is on.

●

Amber: All wireless devices are off.

(2)

Power light

●

On: The computer is on.

●

Blinking: The computer is in the Sleep state.

●

Off: The computer is off.

(3)

AC adapter/Battery light

●

White: The computer is connected to external power
and the battery is charged from 90 to 99 percent.

●

Amber: The computer is connected to external power
and the battery is charged from 0 to 90 percent.

●

Blinking amber: A battery that is the only available
power source has reached a low battery level. When
the battery reaches a critical battery level, the
battery light begins blinking rapidly.

●

Off: The battery is fully charged.

(4)

Hard drive light

●

Blinking white: The hard drive is being accessed.

●

Amber: HP 3D DriveGuard has temporarily parked the
hard drive.

Chapter 2 External component identification

Summary of Contents for 645 G1











































































































































































Search results

Summary of Contents for 645 G1

Reviews:

Related manuals for 645 G1

Brands by name

Popular brands

HP 645 G1, Maintenance And Service Manual

Search results

Summary of Contents for 645 G1

Reviews:

Related manuals for 645 G1

Brands by name

Popular brands