●
Function button board (see
Function button board on page 96
)
●
Power button board (see
Power button board on page 86
)
●
Fingerprint reader board (see
Fingerprint reader board on page 87
)
Remove the TouchPad:
1.
Remove the four Torx screws (1) that secure the TouchPad to the top cover.
2.
Release the clip (2), and then remove the TouchPad (3).
Reverse this procedure to install the TouchPad.
Power connector cable
Description
Spare part number
For use on models equipped with a 15.6-in. display assembly
738694-001
For use on models equipped with a 14-in. display assembly
738683-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 56
), and then remove the following components:
Power connector cable 101
Summary of Contents for 645 G1
Page 4: ...iv Safety warning notice ...
Page 10: ...x ...
Page 37: ...Computer major components Computer major components 27 ...