HP 645 G1 Maintenance And Service Manual Download

Page: 125 / 170

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE:

The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English only, and you

must use a Windows computer to download and create the HP UEFI support environment because only .exe
files are offered.

There are two options to download HP PC Hardware Diagnostics to a USB device:

Download the latest UEFI version:

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

In the HP PC Hardware Diagnostics section, click the Download link, and then select Run.

Download any version of UEFI for a specific product:

Go to

http://www.hp.com/support

, and then select your country. The HP Support page is displayed.

Click Drivers & Downloads.

Use the categories listed to find your product.

– or –

Click Find Now to let HP automatically detect your product.

Select your computer, and then select your operating system.

In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version
you want.

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 115

Summary of Contents for 645 G1











































































































































































Search results

Summary of Contents for 645 G1

Reviews:

Related manuals for 645 G1

Brands by name

Popular brands

HP 645 G1, Maintenance And Service Manual

Search results

Summary of Contents for 645 G1

Reviews:

Related manuals for 645 G1

Brands by name

Popular brands