HP 64147A User Manual Download | Manualshive

Page: 80 / 105

background image

Simulated I/O
Configuration

The simulated I/O feature and configuration options are described in
the Simulated I/O Reference manual.

Interactive
Measurement
Configuration

The interactive measurement configuration questions are described in
the chapter on coordinated measurements in the Softkey Interface
Reference manual. Examples of coordinated measurements that can be
performed between the emulator and the emulation analyzer are found
in the "Using the Emulator" chapter.

External Analyzer
Configuration

The external analyzer configuration options are described in the
Analyzer Softkey Interface User’s Guide.

Saving a
Configuration

The last configuration question allows you to save the previous
configuration specifications in a file which can be loaded back into the
emulator at a later time.

Configuration file name? <FILE>

The name of the last configuration file is shown, or no filename is
shown if you are modifying the default emulator configuration.

If you press <RETURN> without specifying a filename, the
configuration is saved to a temporary file. This file is deleted when
you exit the Softkey Interface with the "end release_system" command.

When you specify a filename, the configuration will be saved to s file
specified with extensions of ".EA".

Ending out of emulation (with the "end" command) saves the current
configuration, including the name of the most recently loaded

4-20 Configuring the Emulator

«
...
78
79
80
81
82
...
»

Summary of Contents for 64147A










































































































Reviews:

No comments

Related manuals for 64147A

Brand: Major Pages: 52

Brand: LA Audio Pages: 9

Brand: LANGER EMV-Technik Pages: 25

Electric Clamshell CSE12-208VCD

Brand: Lang Pages: 16

Brand: Ultrawave Pages: 30

Brand: Ultrasound Technologies Pages: 12

Brand: Garmat Pages: 13

Brand: Gama Sonic Pages: 4

Brand: TE Connectivity Pages: 15

Brand: ParTech Pages: 16

Brand: Crystal Pages: 8

SYNBIOSIS ProtoCOL 3

Brand: SynOptics Pages: 2

Brand: Tascam Pages: 32

Brand: Omni Pages: 20

Combination EC Series

Brand: Eastey Pages: 81

Brand: JK Audio Pages: 20

Brand: Game Winner Pages: 40

Aculux AX3 A WDTW

Brand: Acuity Brands Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands