HP 64147A, User Manual

Page: 27 / 105

Entering the
Softkey Interface
If you have installed your emulator and Softkey Interface software as
directed in the HP 64700 Series Emulators Softkey Interface
Installation Notice, you are ready to enter the interface. The Softkey
Interface can be entered from the HP-UX shell.
From the HP-UX Shell
If /usr/hp64000/bin is specified in your PATH environment variable,
you can also enter the Softkey Interface with the following command.
$ emul700 -u skemul <emul_name> <RETURN>
The "emul_name" in the command above is the logical emulator name
given in the HP 64700 emulator device table
(/usr/hp64000/etc/64700tab.net).
#--------+------------+-----------+-------------------------------------------
# Channel| Logical | Processor | Remainder of Information for the Channel
# Type | Name | Type | (IP address for LAN connections)
#--------+------------+-----------+-------------------------------------------
lan: 7750 m37750 21.17.9.143
If this command is successful, you will see a display similar to figure
2-3. The status message shows that the default configuration file has
been loaded. If the command is not successful, you will be given an
error message and returned to the HP-UX prompt. Error messages are
described in the Softkey Interface Reference manual.
Getting Started 2-5