HP 64147A, User Manual

Page: 52 / 105

Trace List Depth=512 Offset=0
Label: Address Data Opcode or Status w/ Source Lines time count
Base: hex hex mnemonic relative
##########spmt_demo.c - line 201 thru 204 ############################
semantic_check()
{
int i;
after 00F462 3B0B PHD 120 nS
+002 00F463 0694 TSA 480 nS
+003 000690 0694 0694H data write 120 nS
+004 00F464 0694 SEC 120 nS
+005 00F465 0002 SBC A,#0002H 280 nS
+008 00F468 3A1B TAS 600 nS
+009 00F469 645B INC A 120 nS
+011 00F46A 645B TAD 280 nS
##########spmt_demo.c - line 205 #######################################
for (i = 0; i 4; i++)
STATUS: M37750/51--Running user program Emulation trace complete______...R....
display trace compress on
run trace step display modify break end ---ETC--
As you can see, the analysis trace display shows the analysis trace lists
without fetch cycles. With this command you can examine program
execution easily.
If you want to see all of cycles including fetch cycles, enter following
command:
display trace compress off <RETURN>
The trace display shows you all of the cycles the emulation analyzer
have captured.
Displaying Trace with
Time Count Absolute
Enter the following command to display count information relative to
the trigger state.
display trace count absolute <RETURN>
2-30 Getting Started