HP 64147A, User Manual

Page: 94 / 105

You can generate HP format files from these two files with the
following command:
$ m77cnvhp sample <RETURN>
Note
The converter uses both .hex file and .sym file. You need to direct your
assembler and linker to generate .sym file.
Specifications
The following are specifications of the format converter.
Label names and Symbol names must be 15 and less
characters in length.
File name must be 14 and less characters in length.
Up to 10000 sections can be handled.
Up to 1000 functions can be handled.
If a label name or symbol name contains "?", it will be
replaced with "_".
Note
When you convert files which contain no local symbols, the assembler
symbol files (.A file) won’t be generated. In this case, you will see an
error message when you load the program into the emulator. However,
this error will cause no damage on your operation.
B-2 Using the Converter