Figure 14 EVA4400 front panel LEDs
Table 3 EVA4400 status lights during startup
Fault condition
Operating condition
Startup condition
LED function
Number
N/A
Off—Blinking if turned
on remotely
Blinking blue
UID (Unit ID)
1
Green
Blinking green
Enclosure external health
2
Blinking amber
Off
Off
Enclosure fault warning
3
Amber—Indicates link
lost
Green
Solid amber
Link to host
4
Blinking
green—Indicates
Green
Solid amber
Fan condition
5 (2 LEDs)
charging or defective
FRU
Blinking
amber—Indicates
defective FRU
Green
Solid amber
Battery condition
6 (2 LEDs)
If the LED patterns described in
Table 3 (page 21)
are not illuminated:
•
Check your cable connections between the device and the EVA.
•
Check the availability of your power source.
•
Review the installation procedures.
•
Remove and reinsert the module.
Verify the operating status of the disk enclosures
To verify that the disk enclosures and hard drives are operating properly, view the enclosure and
hard drive LEDs and compare them with the patterns described in the documentation for these
devices. If the LEDs indicate a fault, see the HP 4400 Enterprise Virtual Array User Guide.
Verify the operating status of the disk enclosures
21
