manualshive.com logo in svg

HP 39G, Master Manual

Share
Download
HP 39G Master Manual Download Page 56

56

 

Let's have a look at the meaning of the CHKs (check marks) on the second 
page of 

PLOT

 

SETUP

.  Although they are not used often they can be quite 

useful and I recommend highly that you use 

Simult:

 

Simultaneous 

The first option 

Simult:

 controls whether each graph is drawn separately (one 

after the other) or whether they are all drawn at the same time, sweeping 
from left to right on the screen. 
 
 
My preference is to turn this off.  I find that if 
there are more than two functions defined then 
drawing them all at the same time can be 
confusing.  Turning off 

Simult:

 means that they 

are drawn one after the other, in the order that 
they are defined.  This is obviously a bit 
slower. 

Connect 

The second option 

Connect:

 controls whether the separate dots that make up 

a graph are connected with lines or left as dots. 

 
 
 
          vs… 
 
 
 

Axes 

The third option 

Axes:

 controls whether axes are drawn.  The fourth 

Inv.Cross:

 controls the appearance of the cursor that is moved by the arrow 

keys.  It is best if you try this one yourself to see the effect. 

Labels 

The fifth option 

Labels:

 controls whether labels (X, Y and numbers) are put 

on the axes.  The only time this causes problems is if the scale is an odd 
one, causing the labels to have too many decimal places. 

Grid 

The sixth and last check 

Grid:

 causes a grid of 

dots to be drawn on the screen (see right).  
The density of the grid is controlled by the 
values of Xtick and Ytick.  This can be quite 
useful. 
 

Summary of Contents for 39G












































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands