HP 397381-001 User Manual Download Page 20

Page: 20 / 192

Bottom components

Component

Description

(1)

Battery bay

Holds the primary battery pack.*

(2)

Battery pack release latch

Releases the battery pack from the battery bay.

(3)

Memory module compartment

Contains the memory module slots.

(4)

Hard drive bay

Holds the hard drive.

(5)

Vents (2)†

Enable airflow to cool internal components.

CAUTION

To prevent overheating, do not obstruct vents. Use the

computer only on a hard, flat surface. Do not allow another hard
surface, such as an adjoining optional printer, or a soft surface,
such as pillows or thick rugs or clothing, to block airflow.

NOTE

The computer fan starts up automatically to cool internal

components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.

*Battery packs vary by model.

†The computer has 3 vents. One other vent is located on the rear of the computer.

Chapter 1 Notebook Tour

ENWW

Summary of Contents for 397381-001

































































































































































































Search results

Summary of Contents for 397381-001

Reviews:

Related manuals for 397381-001

Brands by name

Popular brands

HP 397381-001, User Manual

Search results

Summary of Contents for 397381-001

Reviews:

Related manuals for 397381-001

Brands by name

Popular brands