HP 397381-001 User Manual Download

Page: 107 / 192

Inserting a PC Card

CAUTION

To prevent damage to the computer and external media cards, do not insert an

ExpressCard into a PC Card slot or a PC Card into an ExpressCard slot.

CAUTION

To prevent damage to the connectors:

Use minimal force to insert a PC Card.

Do not move or transport the computer when a PC Card is in use.

To insert a PC Card:

Hold the PC Card label-side up, with the connectors facing the computer.

Gently slide the card into the PC Card slot until the card is seated.

The operating system will issue a sound to indicate that a device has been detected.

NOTE

The first time you insert a PC card, the "Found New Hardware" message is

displayed in the notification area, at the far right of the taskbar.

Stopping or removing a PC Card

CAUTION

To prevent loss of data or an unresponsive system, stop a PC Card before

removing it.

ENWW

PC Cards (select models only)

Summary of Contents for 397381-001

































































































































































































Search results

Summary of Contents for 397381-001

Reviews:

Related manuals for 397381-001

Brands by name

Popular brands

HP 397381-001, User Manual

Search results

Summary of Contents for 397381-001

Reviews:

Related manuals for 397381-001

Brands by name

Popular brands