HP 397381-001, User Manual

Page: 138 / 192

f. Click Modem .
g. Clear the check box for Wait for dial tone before dialing .
h. Click OK twice.
If you continue to receive the “No Dial Tone” error message after clearing the Wait for dial tone
before dialing check box:
1. Select Start > Control Panel > Network and Internet Connections .
2. On the upper menu in the left pane of the Network and Internet Connections window, click
Phone and Modem Options .
3. Click the Dialing Rules tab.
4. Select your current modem location setting.
5. Click Edit .
6. Select your current location from the Country/Region drop-down list. If you select a country or
region that is not supported by the modem, the Country/Region selection for USA or UK is
displayed by default.
7. Click Apply and then OK .
8. In the Phone and Modem Options window, click the Modems tab.
9. Click the listing for the modem, and then click Properties .
10. Clear the check box for Wait for dial tone before dialing .
11. Click OK twice.
Using preinstalled communication software
To use preinstalled modem software for terminal emulation and data transfer:
1. Select Start > All Programs > Accessories > Communications .
2. Click a fax or terminal emulation program or Internet connection wizard.
128 Chapter 10 Modem and Local Area Network ENWW