Page 18
21091-0-0606
5”
FLOOR LEVEL
(Top surface of carpet, wood, tile, etc...)
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas
supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department.
• If you smell gas, shut off control valve, open doors and windows, and do not
use any electrical device. Call our technical department at (877) 459-1583.
After completion of gas pipe connections, all joints must be checked for gas-tightness by means of leak detector solution,
soapy water or an equivalent solution, as applicable.
CAUTION: Since some leak test solutions, including soapy water, may cause corrosion or stress cracking, all tested pipes
and joints shall be rinsed in water, unless it has been determined that the test solution is a non-corrosive type.
Shut off valve
Any compound used on the threaded gas piping joint shall be resistant to any
action of liquefied petroleum gas.
A shut off valve (or appliance connector valve) must be installed in the gas line
upstream to permit servicing.
Summary of Contents for HW075DVN-1
Page 23: ...21091 0 0606 Page 23 PARTS VIEW...
Page 27: ...21091 0 0606 Page 27 NOTES...