Page 43
EvErfrESh watEr trEatmEnt guidE
at spa
startup
or refill
Follow start-up and Refill Procedures section
NoTe: use the
Clean-Screen
®
pre-filter when filling
the spa to remove unwanted contaminants.
Prior to
each use
(Test before adding
any chemicals; do not
add any chemicals
if proper, or higher
levels are found.)
Add one half (½) teaspoon of sodium dichlor per
250-gallons (950 liters)
Add one (1) tablespoon of monopersulfate (MPs)* per
250-gallons (950 liters)
Gleam
™
(Model GLM)
Pulse
®
(Model PLs)
Flair
®
(Model FLR)
Bolt
™
(Model BLT)
Glow
®
(Model GLW)
1 teaspoon
⅔ teaspoon
½ teaspoon
½ teaspoon
½ teaspoon
Gleam
(Model GLM)
Pulse (Model PLs)
Flair (Model FLR)
Bolt
(Model BLT)
Glow (Model GLW)
2 tablespoons
1⅓ tablespoons
1 tablespoon
1 tablespoon
1 tablespoon
once a
week
Add one and one half (1½) teaspoons of sodium
dichlor per 250-gallons (950 liters)
Add three (3) tablespoons of monopersulfate (MPs)* per
250-gallons (950 liters)
Gleam
(Model GLM)
Pulse (Model PLs)
Flair (Model FLR)
Bolt
(Model BLT)
Glow (Model GLW)
3 teaspoons
2 teaspoons
1½ teaspoons
1½ teaspoons
1½ teaspoons
Gleam
(Model GLM)
Pulse (Model PLs)
Flair (Model FLR)
Bolt
(Model BLT)
Glow (Model GLW
6 tablespoons
4 tablespoons
3 tablespoons
3 tablespoons
3 tablespoons
every four
months
drain and refill your spa. Replace the FreshWater
Ag+
silver ion purifier
NoTe: use the clean-screen Pre-Filter when filling the spa to remove unwanted contaminants.
as needed,
if water is hazy,
cloudy, or has an
odor
Add one and one half (1½) teaspoons of sodium dichlor per 250-gallons (950 liters)
Gleam
(Model GLM)
Pulse (Model PLs)
Flair (Model FLR)
Bolt
(Model BLT)
Glow (Model GLW)
3 teaspoons
2 teaspoons
1½ teaspoons
1½ teaspoons
1½ teaspoons
freSHWaTer
ag+
®
SILver Ion PUrIfIer rePLaCeMenT
When replacing the silver ion purifier (every four months), it is highly recommended that the spa be drained and refilled at the same time. After
refilling the spa with water, balance the Total Alkalinity (TA), calcium Hardness (cH) and pH to the recommended levels. shock the spa by adding
sodium dichlor (see sanitization Table for details).
1. Fold back the vinyl cover.
2. carefully remove and set aside the filter compartment cover.
3. Remove any floating items within the filter compartment.
4. Locate the gray filter cap. Turn the filler cap counterclockwise until the cap can be removed from the filter standpipe.
5. Remove and clean filter cartridge.
NOTE:
When replacing the FreshWater
Ag+
silver ion purifier, it is an excellent time to clean and rotate the filter to extend its life. To rotate the
filter, simply replace the existing filter with another one. Then clean and store the old one until the next time the FreshWater
Ag+
silver ion purifier
needs replacement.
6. Remove the existing FreshWater
Ag+
silver ion purifier.
7. Install the new FreshWater
Ag+
silver ion purifier into the filter standpipe. do not force the FreshWater
Ag+
silver ion purifier down into the filter standpipe.
8. Reinstall the cleaned filter cartridge.
9. Replace and secure the gray filter cap.
10. Replace the filter compartment cover.
11. Fold the cover back into place.
WaRNING:
Never use the spa with the filter cartridge or filter standpipe removed!
*MPs is an oxidizer, not a sanitizer.
NoTe: use the clean-screen pre-filter when filling the spa to remove unwanted contaminants.
or
or
Page 43
Water quality and Maintenance
Summary of Contents for Limelight
Page 1: ......
