HotSpring Limelight Owner'S Manual Download

Page: 55 / 56

Page 52

SPa watEr maintEnancE trouBlEShooting guidE

Problem

Probable causes

Solutions

cloudy Water

• Dirty filters

• Excessive oils / organic matter

• Improper sanitization

• Suspended particles / organic matter

• Overused or old water

• Clean filters

• Shock spa with sanitizer

• Add sanitizer

• Adjust pH and/or alkalinity to recommended range

• Run jet pump(s) and clean filters

• Drain and refill the spa

Water odor

• Excessive organics in water

• Improper sanitization

• Low pH

• Shock spa with sanitizer

• Add sanitizer

• Adjust pH to recommended range

chlorine odor

• Chloramine level too high

• Low pH

• Shock spa with sanitizer

• Adjust pH to recommended range

Musty odor

• Bacteria or algae growth

• Shock spa with sanitizer–if problem is visible or persistent, drain, clean

and refill the spa

organic buildup / scum ring

around spa

• Build-up of oils and dirt

• Wipe off scum with clean rag – if severe, drain the spa, use a spa

surface and tile cleaner to remove the scum, and refill the spa

Algae Growth

• High pH

• Low sanitizer level

• Shock spa with sanitizer and adjust pH

• Shock spa with sanitizer and maintain sanitizer level

eye Irritation

• Low pH

• Low sanitizer level

• Adjust pH

• Shock spa with sanitizer and maintain sanitizer level

skin Irritation / Rash

• Unsanitary water

• Free chlorine level above 5 ppm

• Shock spa with sanitizer and maintain sanitizer level

• Allow free chlorine level to drop below 5 ppm before spa use

stains

• Total alkalinity and/or pH too low

• High iron or copper in source water

• Adjust total alkalinity and/or pH

• Use a metal deposit inhibitor

scale

• High calcium content in water – total

alkalinity and pH too high

• Adjust total alkalinity and pH – if scale requires removal, drain the spa,

scrub off the scale, refill the spa and balance the water

Page 52

Service Information

Summary of Contents for Limelight

























































Search results

Summary of Contents for Limelight

Reviews:

Related manuals for Limelight

Brands by name

Popular brands

HotSpring Limelight, Owner'S Manual

Search results

Summary of Contents for Limelight

Reviews:

Related manuals for Limelight

Brands by name

Popular brands