cONTROL pANEL OpERATIONS
CONTROl PANEl
your
Hot Spring
®
spa comes equipped with a control panel located on the bartop above the equipment compartment door. The control panel allows
the user to set the temperature, activate the jets and light, and access menus to lock the temperature and/or spa functions, and uses indicator lights
and an integrated LCD display to provide a quick visual check of the spa’s status.
Ready Indicator
Power Indicator
Jets Button
Light Button
on/up Button
Off/Down Button
Menu Mode Up Button
Menu Mode Down Button
Display
Control panel Buttons
Ready Indicator
Set Icon
Lock Icon
Water Care
Icon
Jets Icon
Light Icon
power Indicator
Summer Timer
Icon
audio Icon
Character Display
Temp Icon
Control panel Display
CONTROl PANEl bUTTON ANd dISPlAY
The control panel has buttons which the spa user presses to set the temperature, turn the light on and off, activate or deactivate the jet pumps
and several other functions depending on what has been added to your spa. The control panel display responds to let you know you’ve pressed a
button, and that the selected function has been performed. After a period of non-use, pressing any button will wake up a sleeping display, as well as
performing its function. Function icons when in active mode will remain lit during the sleeping display
JeTS ConTroL
(PULSe, fLaIr, gLoW & boLT onLy)
The JeTs button activates the jet pump. When the JeTs button is pressed, the JeTs symbol will illuminate on the control panel display. The
symbol will remain lit until the button is pressed to turn off the jet pump, or after two hours of continuous
operation when the pump is automatically shut off by the control system.
If the jet pump will not engage, make sure
SPA LOCK
is deactivated.
Pressing the JeTs button operates the jets for Pulse, Flair and Glow as follows:
●
1st press = low speed of jet pump 1
●
2nd press = high speed of jet pump 1
●
3rd press = high speed of jet pump 1 & 2
●
4th press = high speed of jet pump 2 and low speed of jet pump 1
●
5th press = high speed of jet pump 2
●
6th press = jet pumps off
Pressing the JeTs button operates the jets for the Bolt as follows:
●
1st press = jet pump on
●
2nd press = jet pump of
Jets Display
Page 27
Page 27
Control Panel operation
Summary of Contents for Limelight
Page 1: ......
