Page 28
Control Panel operation
JeTS ConTroL
(gLeaM onLy)
The JeTs button activates jet pump 1 when the JeTs button is first pressed, the JeTs symbol and JeT 1 will
illuminate on the control panel display. The 1 will flash indicating jet pump 1 is on and in low speed. Press the
oN
button to place jet pump 1 on high speed. Pressing the oN
button again will shut the pump off.
From the home screen, pressing the JeTs button two times will illuminate JeT 2. Press the oN
button to place jet
pump 2 on high speed. Pressing the oN
button again will shut the pump off.
From the home screen, pressing the JeTs button three times will illuminate JeT 3. Press the oN
button to place jet pump 3 on high speed.
Pressing the oN
button again will shut the pump off.
From the home screen, pressing the JeTs button four times will illuminate ALLJT. Press the oN
button to place all three jet pumps on high
speed. Pressing the oN
button again will shut all the pumps off.
NOTE:
When all jet pumps are off the JeTs symbol is also off. If any of the jet pumps are on the JeTs symbol will also be on. To determine which
pump(s) are on, scroll through the JeTs menus. Flashing numbers in any of the first three JeTs menus indicates that jet pump is on.
LIgHT
All Hot spring
®
spas come equipped with Raio
®
light system to enhance spa use at night. The spa uses a specially designed low voltage dimmable
Led light source.
LIgHT - on/off & InTenSITy ConTroLS
(PULSe, fLaIr, gLoW & boLT onLy)
The light control uses four positions: High, Medium, Low, and off. To turn on the spa light, press the LIGHT button.
This will place all lights in the spa in the High, or maximum intensity position. When the lights turn on, the light symbol
will also illuminate on the control panel display. Press the LIGHT button again to lower the intensity of the lights to
the Medium position. Press the LIGHT button again to lower the intensity even more, placing the lights intensity in
the Low position. Press the LIGHT button one more time to shut the lights off. When the light is deactivated, the light
symbol will also turn off.
If the lights are left on, they will automatically be turned off by the control system after 6 hours of continuous
operation. The light symbol on the panel will also turn off when the lights are deactivated.
If the lights will not turn on, make sure
SPA LOCK
is deactivated.
SPA LOCK
disables the controls on the control panel (see following pages for
more information on SPA LOCK).
LIgHT - on/off, InTenSITy & MULTI-CoLor ConTroLS
(gLeaM onLy)
The LIGHT button is used to activate all of the light functions.
Press LIGHT button one time from home screen = ALL display. used to adjust all of the lights.
•
When the LIGHT button is first pressed, all the spa lights go on and are in the High light position (dIM 3), the light symbol will be on and the
word ALL will be illuminated on the display. Press the
OFF ▼ button for a Medium intensity (DIM 2), press the OFF ▼ button again for a Low
intensity (DIM 1) and if the OFF ▼ button is pressed a third time (DIM 0) the lights will go off. Press the
oN
button to increaset the light
intensity.
•
Press the LIGHT button while in the dIM mode to enter into the coLoR mode. Press oN
button or
OFF ▼ button to change the light color
of all the spa lights to one of 7 different colors.
•
Press the LIGHT button while in the coLoR mode to enter in the LooP0 mode. Press oN
button to change the LooP mode from 1
to 3. Press the
OFF ▼ button to lower the LOOP mode from 3 to 0. LOOP mode is an electronic color wheel that will display a
continuous
sequence of colors, the higher the number the faster the color sequence. When the LooP is on 0, the LooP mode is off.
Press LIGHT button two times from home screen = INT display. used to adjust internal lights.
•
Press oN
button or
OFF ▼ button to enter into the DIM mode.
Press the
OFF ▼ button for a Medium intensity (DIM 2), press the OFF ▼
button again for a Low intensity (DIM 1) and if the OFF ▼ button is pressed a third time (DIM 0) the internal lights will go off. Press the
oN
button to increaset the light intensity.
•
Press the LIGHT button while in the dIM mode to enter into the coLoR mode. Press oN
button or
OFF ▼ button to change the internal
light color of all the spa lights to one of 7 different colors.
•
Press the LIGHT button while in the coLoR mode to enter in the LooP0 mode. Press oN
button to change the LooP mode from 1
to 3. Press the
OFF ▼ button to lower the LOOP mode from 3 to 0. LOOP mode is an electronic color wheel that will display a
continuous
sequence of colors, the higher the number the faster the color sequence. When the LooP is on 0, the LooP mode is off.
Press LIGHT button three times from home screen = eXT display. used to adjust external lights.
•
Press oN
button or
OFF ▼ button to enter into the DIM mode.
Press the
OFF ▼ button for a Medium intensity (DIM 2), press the OFF ▼
button again for a Low intensity (DIM 1) and if the OFF ▼ button is pressed a third time (DIM 0) the external lights will go off. Press the
oN
button to increaset the light intensity.
Light Display
Jets Display
Summary of Contents for Limelight
Page 1: ......
