52
6. OTHER
PROBLEM
POSSIBLE CAUSE
REMEDY
[1] Icemaker will not
stop when bin is
filled with ice.
a) Bin Control Switch
1. Completely
disconnected and
dropped inside bin.
1. Place in position.
2. Detector broken.
2. Replace.
3. Detector out of
position.
3. Place in position.
4. Defective reed
switch.
4. Check for continuity and
replace.
5. Reed switch out of
position.
5. Place in position.
6. Magnet disconnected
from detector.
6. Place in position.
b) Control Board
1. Defective.
1. Check and replace.
[2] Abnormal noise
a) Pump Motor
1. Bearings worn out.
1. Replace.
b) Fan Motor
1. Bearings worn out.
1. Replace.
2. Fan blade deformed. 2. Replace fan blade.
3. Fan blade does not
move freely.
3. Replace.
c) Compressor
1. Bearings worn out,
or cylinder valve
broken.
1. Replace.
2. Mounting pad out
of position or loose
hold-down bolt.
2. Reinstall.
d) Refrigerant Lines
1. Rub or touch lines or
other surfaces.
1. Reposition.
[3] Ice in storage bin
often melts.
a) Bin Drain
1. Plugged.
1. Clean.
