Hoshizaki KM-40C-HC Service Manual Download Page 2

Page: 2 / 91

CONTENTS

PAGE

I. SPECIFICATIONS -------------------------------------------------------------------------------------1

1. DIMENSIONS/SPECIFICATIONS --------------------------------------------------------------1

II. GENERAL INFORMATION -------------------------------------------------------------------------2

1. CONSTRUCTION ----------------------------------------------------------------------------------2

[a] KM-40C-HC, KM-60C-HC --------------------------------------------------------------------2

[b] KM-80C-HC --------------------------------------------------------------------------------------3

[c] ICEMAKING COMPARTMENT (KM-40C-HC, KM-60C-HC) ------------------------4

[d] ICEMAKING COMPARTMENT (KM-80C-HC) ------------------------------------------5

SEQUENCE OF OPERATION ------------------------------------------------------------------6

[a] BASIC CONTROL

-----------------------------------------------------------------------------6

[b] BIN CONTROL

---------------------------------------------------------------------------------8

[c] HALT CONTROL

-------------------------------------------------------------------------------9

[d] SANITATION CONTROL

------------------------------------------------------------------- 10

[e] WATER CLEANING CONTROL

---------------------------------------------------------- 11

[f] AUTOMATED CHEMICAL CLEANING CONTROL ----------------------------------- 12

[g] FULLY AUTOMATED CHEMICAL CLEANING CONTROL (OPTION) --------- 14

3. CONTROL BOARD ------------------------------------------------------------------------------ 17

[a] INPUT/OUTPUT LAYOUT ----------------------------------------------------------------- 17

[b] SWITCH OPERATION ---------------------------------------------------------------------- 18

[c] MODEL CODE SETTING ------------------------------------------------------------------ 19

[d] USER SETTINGS ---------------------------------------------------------------------------- 19

[e] SERVICE MODE ----------------------------------------------------------------------------- 21

[f] 7-SEGMENT DISPLAY ---------------------------------------------------------------------- 24

[g] ERROR CODES ------------------------------------------------------------------------------ 25

4. THERMISTOR ------------------------------------------------------------------------------------- 29

5. BIN CONTROL ------------------------------------------------------------------------------------ 30

[a] EXPLANATION OF OPERATION -------------------------------------------------------- 30

[b] BIN CONTROL CHECK PROCEDURE ------------------------------------------------ 30

III. TECHNICAL INFORMATION -------------------------------------------------------------------- 32

1. WATER CIRCUIT AND REFRIGERANT CIRCUIT --------------------------------------- 32

[a] KM-40C-HC, KM-60C-HC ------------------------------------------------------------------ 32

[b] KM-80C-HC ------------------------------------------------------------------------------------ 33

2. WIRING DIAGRAM ------------------------------------------------------------------------------ 34

[a] KM-40C-HC, KM-60C-HC ------------------------------------------------------------------ 34

[b] KM-80C-HC ------------------------------------------------------------------------------------ 35

3. TIMING CHART ----------------------------------------------------------------------------------- 36

[a] BASIC AND BIN CONTROLS ------------------------------------------------------------- 36

[b] SANITATION (SANITATION MODE) ---------------------------------------------------- 38

[c] HALT --------------------------------------------------------------------------------------------- 39

[d] SANITATION (CLEANING BUTTON) --------------------------------------------------- 40

[e] WATER CLEANING ------------------------------------------------------------------------- 41

[f] AUTOMATED CHEMICAL CLEANING -------------------------------------------------- 43

[g] FULLY AUTOMATED CHEMICAL CLEANING --------------------------------------- 44

Summary of Contents for KM-40C-HC




























































































Search results

Summary of Contents for KM-40C-HC

Reviews:

Related manuals for KM-40C-HC

Brands by name

Popular brands

Hoshizaki KM-40C-HC, Service Manual

Search results

Summary of Contents for KM-40C-HC

Reviews:

Related manuals for KM-40C-HC

Brands by name

Popular brands