Hoshizaki IM-240AME, Service Manual

Page: 34 / 100

30 30
E1CG4880210 E1CG4880210
5. ELECTRICAL CONNECTIONS 5. ELECTRICAL CONNECTIONS
WARNING WARNING
THIS APPLIANCE MUST BE EARTHED THIS APPLIANCE MUST BE EARTHED
This icemaker requires an earth that meets the national and local electrical code This icemaker requires an earth that meets the national and local electrical code
requirements. To prevent possible severe electrical shock injury to individuals
requirements. To prevent possible severe electrical shock injury to individuals
or extensive damage to equipment, install a proper earth wire to this icemaker.
or extensive damage to equipment, install a proper earth wire to this icemaker.
Remove the plug from the mains socket before any maintenance, repairs or
Remove the plug from the mains socket before any maintenance, repairs or
cleaning is undertaken.
cleaning is undertaken.
* This icemaker must have a separate power supply or receptacle of 220 - 240V. * This icemaker must have a separate power supply or receptacle of 220 - 240V.
* Stacked icemakers should each have a separate receptacle, but they must all be connected * Stacked icemakers should each have a separate receptacle, but they must all be connected
in parallel to the same single phase supply or circuit with sufficient ampacity. In addition in parallel to the same single phase supply or circuit with sufficient ampacity. In addition
and to avoid nuisance tripping, individual circuit breakers for each machine should not be
and to avoid nuisance tripping, individual circuit breakers for each machine should not be
used.
used.
* The main control box fuse is rated at 5A and should only be replaced by a qualified service * The main control box fuse is rated at 5A and should only be replaced by a qualified service
engineer. engineer.
* Usually an electrical permit and services of a licensed electrician are required. * Usually an electrical permit and services of a licensed electrician are required.
* If the supply cord and the plug should need to be replaced, it should only be done by a * If the supply cord and the plug should need to be replaced, it should only be done by a
qualified service engineer. qualified service engineer.
For the U.K. and the Republic of Ireland only For the U.K. and the Republic of Ireland only
* The wires in the mains lead are coloured in accordance with the following code: * The wires in the mains lead are coloured in accordance with the following code:
Green & Yellow = Earth Green & Yellow = Earth
Blue = Neutral
Blue = Neutral
Brown = Live
Brown = Live
As the colours of the wire in the mains lead of this appliance may not correspond with the As the colours of the wire in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug
which is marked with the letter E or by the symbol or coloured Green or Green-and-
which is marked with the letter E or by the symbol or coloured Green or Green-and-
Yellow. The wire which is coloured Blue must be connected to the terminal which is marked
Yellow. The wire which is coloured Blue must be connected to the terminal which is marked
with the letter N or coloured Black. The wire which is coloured Brown must be connected to
with the letter N or coloured Black. The wire which is coloured Brown must be connected to
the terminal which is marked with the letter L or coloured Red.
the terminal which is marked with the letter L or coloured Red.
* Should the socket outlets in the installation site not be suitable for the plug supplied with * Should the socket outlets in the installation site not be suitable for the plug supplied with
your product, the plug must be removed (cut off if it is moulded on plug) and an appropriate your product, the plug must be removed (cut off if it is moulded on plug) and an appropriate
plug fitted.
plug fitted.