60
C. Removal and Replacement of Evaporator Fan Shroud Assembly
1. Note for RH1-SSB(-HD), RH1-SSB-GD, and Refrigerator Side of RFH2-SSB(-HD)
For RH1-SSB(-HD) aux. code M5_____B and earlier, RH1-SSB-GD aux. code L0
and earlier, and refrigerator side of RFH2-SSB(-HD) aux. code M5 and earlier, there
was a non-interchangeable part change. If your appliance falls into this time frame
and you need to replace parts in the evaporator fan shroud assembly, review the
scenarios below and follow the appropriate solution.
a. Appliance's evaporator shroud has only two holes or has four holes but only the
lower two holes are threaded.
Solution: Order HS-3541 that contains a motor (Shinko), brackets, blade, and
all fasteners required for mounting to the shroud using the existing
threaded holes. For details, see the appliance's parts list.
b. Appliance's evaporator shroud has four threaded holes and a Jakel motor.
Solution: Order a new motor (Shinko), brackets, fan blade, and the appropriate
fasteners listed in the appliance's parts list. Attach the brackets to the
upper two holes on the shroud.
2. Note for FH1-SSB(-HD) and Freezer Side of RFH2-SSB(-HD) and RFH3-SSB(-HD)
For FH1-SSB(-HD) and freezer side of RFH2-SSB(-HD) and RFH3-SSB(-HD) aux.
code M5 and earlier, there was a non-interchangeable part change. If your appliance
falls into this time frame and you need to replace parts in the evaporator fan shroud
assembly, order HS-3545 and replace the entire assembly.