28
ENGLISH
Abnormal
noise.
Operation sound of the refrigeration unit or
condenser fan motor.
No problem.
The foundation is not firm.
Contact your dealer/supplier.
The foundation is not level.
Contact your dealer/supplier.
Something is touching the unit.
Keep it away from the unit.
Too much
foam.
The beer keg has just been shaken or
moved.
Wait until beer in the keg settles down.
The beer keg is almost empty.
Replace with a new keg. See "II. 3. [d] REPLACING BEER
KEG".
The CO2 gas cylinder is left open after the
end of dispensing operation.
Close the cylinder every day at the end of dispensing
operation. See "II. 8. END OF DISPENSING OPERATION".
The regulator is not set to a proper pressure. Adjust the regulator to a proper pressure. See "II. 3. [b]
REPLACING CO2 GAS CYLINDER".
Mug or glass is not clean.
Clean.
The mug or glass temperature is too high.
Follow the instructions of the beer company.
The beer tap or beer circuit is not clean.
Clean See "III. 2. BEER CIRCUIT".
No ice in the water tank.
Wait until ice is produced.
The gas hose is reversely connected.
Reconnect.
Excessive
foam
overflows.
The mug size or platform used is different
from that at the time of setting.
Set a mug of the same size on the same platform as used at
the time of setting.
Too little or
too much
liquid or foam.
The regulator adjust dial has been turned
after liquid amount adjustment.
Readjust the CO2 gas pressure and the liquid and foam
amounts.
Sold out lamp
lights up while
keg is not
empty.
The CO2 gas pressure is not properly
adjusted.
Readjust the CO2 gas pressure and the liquid and foam
amounts.
Foam is in the hose.
See “Too much foam” above.
3. RELOCATION, DISPOSAL, TRANSFER
* In case of relocation or disposal of the product, contact your dealer/supplier.
* When selling or transferring this product, tape this instruction manual to the exterior to provide the new owner with information
on safe and proper use of the product.
4. WARRANTY
Hoshizaki warrants to the original owner/user that all Hoshizaki branded products shall be free of defects in material and/or
workmanship for the duration of the “warranty period”. The warranty shall be effective for one year from the date of installation.
Hoshizaki’s liability under the terms of the warranty are limited and shall exclude routine servicing, cleaning, essential
maintenance and/or repairs occasioned by misuse and installations not in accordance with Hoshizaki guidelines.
Warranty repairs should be completed by an approved Hoshizaki dealer or service agency using genuine Hoshizaki
components.
To obtain full details of your warranty and approved service agency, please contact your dealer/supplier.
